cnsocketss

This equipment is high voltage, so there are a few dangerous parts. Connect the power cord of the VCR to an electrical outlet and press "play. Since each model of VCR is somewhat different, consult your instructions to establish how to set up to record. This forms a frame for the pulley assembly and will make the motor usable for this endeavor by reducing its speed. Once the motor is functioning, push the "stop" button and place the VCR out of the way. The hubs from the first two wheels will have the sections of pipe mounted over them. Through each hole, place a bolt and lock them in position using lock washers and nuts. On the second wheel, place a different loop of cord and have it wrap around the PVC coupling from the first wheel. Program the VCR to record at a predesignated time to set up a feeding schedule. Attach the smaller piece of plywood for a foot and the larger piece of the plywood to stand vertically. The motor should be easily visible and appear much like a metal cylinder." The motor will be spinning at this point. The specific location of the holes is not important, but having them evenly spaced is. Use a good knot to make certain that the loop is tight and secured. Position a loop of cord around the first wheel and motor. Deposit a small amount of dry dog food on the cover and place it on the base of the spindle. Connect the last wheel to the spindle bottom using screws. Construct a platform using a drill, two pieces of plywood, screws and L-brackets. If there is no movement, make sure there is a solid connection with the ribbon cable and that it is seated properly. Locate the components of the power supply. Food will be dispensed for the dog through this hole. Be sure to take off the VCR's mounting bracket. If the wheels do not move but the motor does, verify the loops are on the appropriate wheels and properly tightened. The final cord loop will be placed around the PVC coupling from the second wheel to the wheel with ,energy meter socket,wifi socket ...ادامه مطلب